Andrew Witte replied to Andrew Witte's discussion NavSpark Arduino IDE download??
"Awesome thankx!  Its been fun learning more about the hardware side.
I'll be getting this one that supports both 3.3v and 5v: http://www.amazon.com/PL-2303HX-PL-2303-Serial-Module-PL2303/dp/B00..."
Sep 22, 2015
Andrew Witte replied to Andrew Witte's discussion NavSpark Arduino IDE download??
"Do I need to get a UART adapter to get Serial.print data on my PC?
Like this one: http://www.amazon.com/Armorview-PL2303HX-RS232-Module-Converter/dp/...
If so do I need to hook up the 5v and gnd pins to anything?  Do I hook it up to the battery and…"
Sep 22, 2015
Andrew Witte replied to Andrew Witte's discussion NavSpark Arduino IDE download??
"Ok so it was Pin 0 not 13 for the LED, ic.  Although the fact I can't get messages through the built in USB port is rather disappointing.
I'm working on a project that transpiles C# into C++ and bought this to benchmark and test the output C++ code…"
Sep 21, 2015
Andrew Witte replied to Andrew Witte's discussion NavSpark Arduino IDE download??
"Its like programs can upload but they just don't run.
Tried the "demo_hello_world.ino" with no luck.  Why wont the on board LED light blink either?  Is my device messed up."
Sep 18, 2015
Andrew Witte replied to Andrew Witte's discussion NavSpark Arduino IDE download??
"Awesome tnx! The the upload seems to now work.  Only issue is a simple hello world demo doesn't work.  I'm connecting to port 9600.
Anything i'm missing on this?  I took off the pin connector and hit the reset button after done.

Serial.begin(9600);…"
Sep 18, 2015
Andrew Witte replied to Andrew Witte's discussion NavSpark Arduino IDE download??
"How do I upload the program with GNSS_View?
Now I just get a bunch of junk in the serial monitor:
„�:²� PKÒAà‰……’&’ZIÙ�¢‚šòL‰ŽÑ£¸à’x³È£Â#‚‰� ÁÓ.V’L‰ £‚Á¢Ôÿ£¢ ¡Ø"Ð,²ÒNäI2iåy¢ó#¢‰¡m Óð„’x”2Bƒ‚8¢,QÔÿ£‚AN‡²ÁSƒ.4£¢ ¢I3àkÆþ„�:²‘ ŃŠY¢‚"¢Ë„³¥


What is goi…"
Sep 17, 2015
Andrew Witte replied to Andrew Witte's discussion NavSpark Arduino IDE download??
"Ok tried on Windows 10 x64.  I get the same error on there: "NavSpark image failure. Error code : 4"
I followed the pdf guid.
I'm using Arduino 1.6.5.
I have selected "NavSpark-GL" in Arduino.
Processor: "Leon3 without GNSS library"
Port: COM11

My…"
Sep 17, 2015
Andrew Witte replied to Andrew Witte's discussion NavSpark Arduino IDE download??
"Ok thanks, might mention that the IDE / SDK installer instructions are located in the doc.  With the release notes just floating there, the page looks like its out of date or something is missing... like a download link used to go there but was remo…"
Sep 14, 2015
Andrew Witte replied to Andrew Witte's discussion NavSpark Arduino IDE download??
"I downloaded and build the IDE on Linux/Ubuntu 15.04 from source: https://github.com/NavSpark/Arduino-1.5.6-r2-Src-NavSpark
The NavSpark-GL connects to "/dev/ttyUSB0" but when I try to deploy I get the error: "Unable to open /dev/ttyUSB0" and "Can't…"
Sep 13, 2015
Andrew Witte posted a discussion
Where is the IDE download link?  Because its not in the resources area...
Sep 12, 2015
Andrew Witte is now a member of NavSpark Community
Sep 12, 2015